2.9 Loading Paper Into the Bypass Tray
2
2-35
Before Making Copies Chapter 2
2.9 Loading Paper Into the Bypass Tray
Paper can be fed manually through the bypass tray if you wish to copy onto paper
that is not loaded into a paper drawer, or if you wish to copy onto thick paper,
postcards, envelopes, overhead projector transparencies or label sheets.
✎
Reference
For details on specifying the paper size for the bypass tray, refer to “To specify
the size of the paper in the bypass tray” on page 3-21.
1 Open the bypass tray.
❍ When loading large-sized
paper, open the tray
extension.
2 With the side to be printed on
facing down, insert the paper as
much as possible into the feed
slot.
3 Adjust the lateral guides to fit the
size of the paper.
✎
Reminder!
Do not load so many pages
that the top of the stack is
higher than the ▼ mark.
Push the lateral guides firmly up against the edges of the paper.
If the paper is curled, flatten it before loading it.
Tray
extension
Lateral guide
