2.1 Components and Their Functions
2
2-3
Before Making Copies Chapter 2
5 Paper Feed Cabinet PF-625
(optional)
Paper Feed Cabinet PF-627
(optional)
Paper feed cabinet PF-625 is equipped with a single paper
drawer. The top drawer can be loaded with 500 sheets of
paper, and the bottom drawer can be used as storage.
Referred to as the “single paper feed cabinet” throughout the
manual.
Paper feed cabinet PF-627 is equipped with two paper
drawers. Both the top and the bottom drawers can be loaded
with 500 sheets of paper.
Referred to as the “double paper feed cabinet” throughout the
manual.
6 Paper Feed Cabinet PF-621
(optional)
Equipped with a large-capacity paper drawer that can supply
2,500 sheets of paper
Referred to as the “large-capacity paper feed cabinet”
throughout the manual.
7 Finisher DF-626 (optional) Finishes printed pages according to the selected Output
setting (sorting, stapling, hole-punching or binding), then feeds
out the pages
Referred to as the “finisher” throughout the manual.
• Hole-punching is only available if the optional punch kit (PH-
620) is installed onto finisher DF-626.
In order to install the finisher, the main unit must be installed
on the desk, on the large-capacity paper feed cabinet, or on
the single paper feed cabinet or the double paper feed
cabinet.
8 Finisher DF-621 (optional) Finishes printed pages according to the selected Output
setting (sorting or stapling), then feeds out the pages
Referred to as the “finisher” throughout the manual.
• In order to install the finisher, the main unit must be installed
on the desk, on the large-capacity paper feed cabinet, or on
the single paper feed cabinet or the double paper feed
cabinet.
9 Job Separator JS-621
(optional)
If finisher DF-621 is installed, the number of copy output trays
can be increased.
Referred to as the “job separator” throughout the manual.
10 Main unit The document is scanned by the scanner section, and the
scanned image is printed by the printer section.
Referred to as the “main unit” throughout the manual.
11 Punch Kit PH-620 (optional)* Allows hole-punching to be used if installed onto finisher DF-
626
Referred to as the “punch kit” throughout the manual.
12 Expanded Memory Unit
(optional)*
Increases the memory of the machine to 512 MB (256 MB
standard memory + 256 MB expanded memory unit)
By expanding the memory, the number of pages that can be
stored in the memory can be increased.
Referred to as the “expanded memory unit” throughout the
manual.
13 Hard Disk HD-21 (optional)* Allows more pages to be stored.
In addition, by installing Hard Disk HD-21 and the expanded
memory unit, the “Set Numbering” function can be used.
Referred to as the “hard disk” throughout the manual.
No. Part Name Description
