8.3 Job Control Screens
8
8-23
Managing Jobs Chapter 8
Reprint Screen
✎
Condition
If the “Reprint” function in Administrator mode has been set to “Yes”, the Reprint
screen is available (jobs can be recalled from the memory).
However, if the “Reprint” function has been set to “No”, all jobs are erased after
they are finished being printed. (The Reprint screen is not available.)
For details on setting the “Reprint” function, refer to “Setting the “Reprint”
Function” on page 10-50.
Past copy jobs can be recalled and printed again.
Up to 49 past copy jobs are saved.
If the number of copy jobs exceeds 49 or the memory becomes full, jobs are
deleted, starting from the oldest. Deleted jobs cannot be recalled.
Touch [Reprint]. The Reprint screen (containing the list of printed jobs) appears.
✎
Additional Information
If accounts have been specified from the Utility mode, the screen for entering
the account access code appears after [Reprint] is touched. Using the keypad,
type in the 8-digit access code, and then touch [Enter].
✎
Reminder!
When the machine is turned off, all saved jobs are deleted and can no longer
be recalled.
To return to the Basic screen, touch [Basic].
To delete a job, select the job, and then touch [Delete].
