3.8 Selecting Copy Settings
3
3-41
Basic Copy Operations Chapter 3
Bound Booklet (“Bind” and “Center Erase” Settings)
Select these setting to bind copies with staples and fold them along
the center. (The copies will be made into a booklet.)
If the number of pages in the document cannot be evenly divided
by 4, the necessary number of blank pages are automatically
added to the booklet.
✎
Additional Information
The printed pages are first fed into the copy output tray, and then, if the “Bind”
setting was selected, the pages are bound together. If the pages are removed
from the tray that they were first fed into, booklet binding cannot be performed.
Do not remove the pages from a tray until they are fed into the lower paper
output tray.
If less than 4 document pages are loaded, they will be fed out without being
bound, even if the “Bind” setting was selected.
Example: For 8 single-sided
document pages
Example: For 6 single-sided
document pages
