A SERVICE OF

logo

Open as PDF
next previous
10
10.10 Specifying Expert User Mode Functions
10-86
Utility Mode Operations Chapter 10
Setting the “Center Staple Position” Function
This function is used to make fine adjustments to the center stapling position and
the folding position when binding. (The default setting is 0 mm.)
Before making the adjustment, use the “Booklet” and “Bind” settings to make a copy
sample.
Perform the adjustment while checking the sample that was created.
✎
Reference
For details on the “Booklet” and “Bind” setting, refer to “Selecting Copy Settings”
on page 3-37.
1 Press the [Utility] key.
2 Touch [Admin. Mode].
3 Using the keypad, type in the administrator code.
❍ Touch [Enter].
4 Touch [Expert User Mode].
5 Touch [Center Staple
Position].