6
6.7 Setting the “Enlarged Display Clear Check” Function (Accessibility Mode)
6-14
Additional Copy Operations Chapter 6
6.7 Setting the “Enlarged Display Clear Check”
Function (Accessibility Mode)
When the panel reset timer operation is performed, a message requesting
confirmation to cancel the Enlarge Display mode can be displayed. (The default
setting is “No”.)
In addition, it is possible to specify the display time for the message requesting
confirmation to cancel the Enlarge Display mode.
✎
Hint
The Enlarge Display mode is limited to basic copy functions. The function and
setting names and the illustrations are displayed at a larger size so that they can
be seen more easily. For details, refer to the Enlarge Display Mode User’s
Guide.
1 Press the [Accessibility] key.
2 Touch [Enlarged
Display Clear Check].
3 Select the desired
setting and specify the
display time (30, 60, 90
or 120 seconds) for the
message requesting
confirmation to cancel
the Enlarge Display
mode.
❍ If you do not wish
for the message
requesting
confirmation to
cancel the Enlarge Display mode to appear, touch [No].
