10
10.5 Specifying Default Settings (User’s Choice: 2 Functions)
10-22
Utility Mode Operations Chapter 10
5 Touch the key for the
paper drawer that you
wish to set.
✎
Additional Information
Normal
Select this setting if plain paper is loaded. This is the default setting.
Paper with this setting can be automatically selected with the “Auto Paper
Select” setting and “Auto Zoom” setting.
Fine
Select this setting when using high-quality paper.
Paper with this setting is not automatically selected with the “Auto Paper
Select” setting.
Single Sided Only
Select this setting for paper that should not be used with double-sided
copying (for example, when one side has already been printed on).
Paper with this setting is not automatically selected during automatic
double-sided copying.
Special Paper
Select this setting for paper, other than “Fine” or “Single Sided Only” paper,
that should not be selected automatically.
Paper with this setting is not automatically selected with the “Auto Paper
Select” setting.
6 Touch the key for the desired special paper.
7 Touch [Enter].
8 Touch [Exit], and then touch [Exit] in the Utility screen.
The Basic screen appears again.
