10.2 Programming/Recalling Copy Programs
10
10-5
Utility Mode Operations Chapter 10
Storing Copy Programs
User-specified copy settings can be stored as copy programs.
Each of the 10 copy programs that are stored can be given a name.
Recall the copy programs by touching [Copy Program Recall] on the Utility screen.
1 Select the desired copy settings.
❍ For details, refer to the “Basic Copy Operations” on page 3-1.
2 Press the [Utility] key.
3 Touch [Store].
4 Touch [Mode Store].
5 Touch the key for the
number of the program
where you wish to store
the settings.
A screen appears,
allowing you to enter
the name of the
program.
❍ To delete a copy program
Touch [Delete] in the Mode Store screen, and then touch the number of the
program that you wish to delete. When the number of the program is
selected, the program is deleted.
❍ To check the specified settings for a program
Touch [Check] in the Mode Store screen, and then touch the number of the
program that you wish to check. The specified copy settings are displayed.
To display additional screens of settings, touch [Next] and [Previous]. To
return to the Mode Store screen, touch [Exit].
