A SERVICE OF

logo

10.4 Specifying Default Settings (Users Choice: 1 Functions)
10
10-13
Utility Mode Operations Chapter 10
Setting the Sleep Function
This function is used to specify the length of time after the last operation until this
machine automatically enters Sleep mode, and whether or not the machine enters
Sleep mode when a job is stored in the memory or a locked job is programmed.
(The default setting is 30 min. and Permit.)
Reference
For more details, refer to Turning the Machine On and Off on page 2-17.
Additional Information
Jobs stored in the memory and locked jobs are erased when the machine enters
Power Save mode or Sleep mode.
1 Press the [Utility] key.
2 Touch [Users Choice: 1].
3 Touch [2/2].
4 Touch [Sleep].
5 Press the [C] (clear) key.
The currently specified value is erased.