Filter
Top Products
Electrical Requirements
Below are electrical plug variations. Choose the
one which matches the ampere rating of your unit.
Your model’s ampere rating is printed on the model
and serial number label, attached to the unit,
behind the front panel. (See diagram on page 2.)
Observe all local codes and ordinances.
Do not, under any circumstances, remove the
power supply cord grounding prong.
Fire Hazard
Do not use an extension cord.
Doing so can cause death or fire.
I
PLUG TYPE
NOTE: If codes permit and a separate grounding
wire is used, it is recommended that a qualified
electrician determine that the grounding path is
adequate and not interrupted by plastic, non-
metallic gaskets, or other insulating materials.
Check with a qualified electrician if you are in
doubt as to whether the appliance is properly
grounded.
Electrical Shock Hazard
Plug into a grounded three prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not fuse neutral or grounding circuit.
Failure to follow these instructions can
result in death, electrical shock, or
serious injury.
ELECTRICAL REQUIREMENTS
115 volt models with amperes up
through 12.0
230 and 2301208 volt models with
amperes up through 12.0
230 and 230/208 volt models with
amperes up through 16.0
230 and 230/208 volt models with
amperes up through 24.0
SEE PAGE
4
5
6
7