Filter
Top Products
Operating Instructions
Starting your air conditioner
1. Set Exhaust Control to CLOSED (OFF) for
maximum cooling results.
2. Set System Control to the desired setting.
LO COOL (LO)
. . . . . . . . . . . . . . . . . . . . . for sleeping
comfort
MED
COOL (MED) . . . . . . . . . . . . . . . . . . for
normal
cooling
HI COOL (HI)
. . . . . . . . . . . . . . . . . . . . . .
for maximum
cooling
FAN ONLY*
. . . . . .
for circulating room air when no
cooling is desired
*on some models
3. Turn the Thermostat Control to number 6
(mid-setting). You can adjust the air condi-
tioner’s cooling performance by resetting the
Thermostat Control to a higher number for
maximum cooling. Lower the number setting
for less cooling. You will need to experiment to
find the setting which suits you best.
NOTE: If you turn your air conditioner off or if the
compressor turns off when lowering the Thermo-
stat Control, wait at least 3 minutes before
turning it back on or you may blow a fuse or trip a
circuit breaker.
21