Weber 5500 Burner User Manual


 
11
Assembly
Tools needed
Screwdrivers, regular and
Phillips
Hammer
Two 7/16 inch, one 5/8, 11/16, and 3/4 inch open end or
two adjustable wrenches
Pliers
Level
Electric drill
Supplies needed
You will need a soap and water solution to check for gas
leaks. (See Step "Check for gas leaks.")
Note - The hardware size of nuts, bolts, and screws is
given. For example "1/4-20 x 2 inch bolt" means a bolt
1/4 inch in diameter with 20 threads to the inch, 2 inches
long. On a small screw for example, "6-32 x 1/2 inch
screw" means a number 6 screw, with 32 threads to the
inch, 1/2 inch long.
Step 1
Check package contents
Cooking box
(assembly)
Lid
(assembly)
Bottom tray
Front panel
Accessory tray
Accessory tray with notch
Control panel
®
®
®
®
®
®
®
®
While we give much attention to our products,
unfortunately an occasional error may occur.
If a part is missing, do not go back to the store.
Call the Weber Customer Service Center toll free
1-800-446-1071 to receive immediate assistance.
Have your owner’s manual and serial number of the
barbecue available for reference.