Filter
Top Products
– 61 –
Optional Installation Parts
Part Code Parts name Q’ty
Refrigerant piping
1 ea.
Indoor unit name
Liquid side
(Outer diameter)
Gas side
(Outer diameter)
10, 13 6.35 mm 9.52 mm
16 6.35 mm 12.7 mm
Shield pipe (for extension drain hose) (polyethylene foam, 6 mm thick) 1
Attachment bolt arrangement of outdoor unit
• Secure the outdoor unit with the attachment bolts and nuts if the unit is
likely to be exposed to a strong wind.
• Use φ8 mm or φ10 mm anchor bolts and nuts.
If it is necessary to drain the defrost water, attach drain nipple to the
base plate of the outdoor unit before installing it.
Accessory and Installation Parts
Part No. Part name (Q’ty) Part No. Part name (Q’ty) Part No. Part name (Q’ty)
a
Installation plate x 1
d
Remote control holder x 1
g
Mounting screw
φ4 x 25L x 6
b
Wireless remote control x 1
e
Zeolite-plus filter x 1
h
Remote control holder
mounting screw
φ3.1 x 16L x 2
c
Battery x 2
f
Plasma pure filter x 1
i
Drain nipple* x 1
j
Water-proof rubber cap* x 2
(Heat pump models only)
(Heat pump models only)
Others Name This model is not equipped with an
extension drain hose.
Option:
Owner’s manual (Indoor unit)
Installation manual (Indoor unit)
Installation manual (Outdoor unit)
Specifications (Outdoor unit)
Parts marked with asterisk (*) are packaged with the
outdoor unit.
Y
Z
Suction side
Diffuser
Drain hole
(i)
Elongated drain
hole
(j)
10-2.Optional Parts, Accesories and Tools
• For the extension drain hose, use the
optionally available RB-821SW or a
commercially available one.
• Use the following parts for installaion
of B16EKVP-E, M16EKVP-E.
Parts name
RB-M34EE Expander (φ9.52 → φ12.7)