Filter
Top Products
– 81 –
How to confirm the central control address (New function for AMT32E remote controller)
<Procedure> It can be confirmed even during operation or stopping.
1 Push
UNIT LOUVER
button for 4 seconds or more.
ò
2
In the frame at left side of the remote controller screen, the lighting set contents are
displayed.
During unset time, '' (At shipment from factory) is displayed.
ò
3 After lighting display for 3 seconds, the display automatically disappears.
If any button is pushed during display, immediately the display disappears and then the pushed button is
displayed.
How to confirm the central control address (New function for AMT32E remote controller)
<Procedure> It can be confirmed even during operation or stopping.
1 Push
UNIT LOUVER
button for 4 seconds or more.
ò
2
In the frame at left side of the remote controller screen, the lighting set contents are
displayed.
During unset time, '' (At shipment from factory) is displayed.
ò
3 After lighting display for 3 seconds, the display automatically disappears.
If any button is pushed during display, immediately the display disappears and then the pushed button is
displayed.