Filter
Top Products
© 1997, 2004, 2006 TEXAS INSTRUMENTS INCORPORATED GETTING STARTED WITH THE CBR 2™ SONIC MOTION DETECTOR 5
Run
For TI-83 and TI-84 family calculator users:
Run the EasyData App on the graphing calculator connected to the
CBR 2™
motion detector.
Proceed to step 1, if using a TI-83 Plus-family calculator. For the TI-84 Plus
connected with a unit-to-
CBR 2™ cable, perform steps 1 and 4.
1. Turn on the calculator and have it on the home screen.
2. Press Πto display the list of Apps on your graphing calculator.
3. Choose EasyData and press Í.
The opening screen is displayed for about 2–3 seconds, and then the
main screen is displayed.
4. Select
Start (press q) in the main screen to start collecting data.
For TI-89, TI-92 Plus, TI-89 Titanium and Voyage™ 200 users:
Run RANGER on the graphing calculator connected to the
CBR 2™ motion
detector.
1. Turn on the calculator and have it on the home screen.
2. Press 2 ° to display the list of AppVars on your graphing
calculator.
3. Scroll until you find RANGER. Highlight it and press Í. Type the
closing parenthesis ) and press Í to start the program.
Important information
0 This guide applies to all TI graphing calculators that can be used with the
CBR 2™ motion detector (see page 2); therefore, you may find that some
of the menu names do not match exactly those on your calculator.
0 When setting up activities, ensure that the CBR 2™ motion detector is
securely anchored and that the cord cannot be tripped over.
0 Always disconnect the CBR 2™ motion detector from the calculator
before storing it.
For TI-83 and TI-84 family calculator users:
0 Always exit the EasyData App using the Quit option. The EasyData App
performs a proper shutdown of the
CBR 2™ motion detector when you
choose
Quit. This ensures that the CBR 2™ motion detector is properly
initialized for the next time you use it.
0 EasyData is launched automatically when the unit-to-CBR 2™ cable is
connected from a TI-84 Plus or TI-84 Plus Silver Edition graphing
calculator to a
CBR 2™ motion detector.
For TI-89, TI-92 Plus, TI-89 Titanium and Voyage™ 200 users:
0 EasyData will not run on your calculator. RANGER is the only program
available to simplify the data collection process from the CBR 2.
1
11
1
3
33
3
For quick results, try
one of the classroom-
ready activities in this
guide!