Filter
Top Products
7/50D Plus or 7/50D Controller Chapter 4: Operation 56
The following table explains the status represented by each color at the Station Summary
screen.
Color Label Description
Gray outline Offline Station is not enabled. The controller ignores any demands or
alarms.
Blue Ready Station is enabled and idle (full).
Yellow Demand Station requires material.
Green Loading Station is being loaded with material or is dumping material into
its receiver.
White Purging The material line is being purged of material.
Light Blue Dumping The station is dumping material into its receiver.
Blue, blinking Blow Back Station’s air filter is being cleaned by blowing compressed air
backward through it.
Black, blinking Bypass Bypass switch at the station has been turned on, disabling the
station.
Green, blinking Priority Station is in priority convey mode. Its pump will be temporarily
dedicated to filling it as soon as possible.
Red, blinking Alarm Station is in alarm.
Red outline, blinking Critical Station is in critical alarm. The controller has disabled the station
until the alarm is cleared.
Additional basic information about each station (convey time, dump delay, pump assignment,
and, if enabled, RPV setting, purge settings, and material proofing) is available at the Station
n Operator screen. See p. 61 for details.
Detailed configuration settings for each station are available at the Station n Setup screen. See
p. 74 for details.