Filter
Top Products
7/50D Plus or 7/50D Controller Chapter 3: Installation 48
Note: Touching Help in the lower right of this screen gives you a menu of
online help for the choices in this screen. Touching Return at the
help menu brings you back to the Pump n Setup screen.
3. Adjust settings as required. Touching any box that appears in red (for “disabled”)
toggles it to green (for “enabled”), and vice versa. Touching any box that appears in
light gray gives you a keypad to enter a new value.
Keypad entry works as with many ATM machines: the first digit you enter initially
appears in the rightmost column and moves to the left as you enter more digits. You
do not need to use the decimal point. Use ← to erase any mistakes. Use ↵ to enter the
value. The keypad disappears and the Pump n Setup screen shows the new value in
the selected gray box.
See pp. 73 –77 for details on the options and their default settings.
4. As appropriate:
a. Copy this pump’s settings to one or more other pumps, as described below
—or—
b. Touch Back ◄ to go to the Pump n-1 Setup screen
—or—
c. Touch Next ► to go to the Pump n+1 Setup screen
—or—
d. Touch Goto and enter a pump number to go to that pump’s setup screen