Filter
Top Products
7/50D Plus or 7/50D Controller Chapter 3: Installation 34
4. Attach the other connector to the upper left terminal of the ArmorBlock. Tighten the
cord grip ring until snug.
Note: Retain the terminal caps from the ArmorBlock. They may be used
later.
Note the following illustration for 4-connector central alarm ArmorBlocks:
Figure 17: 4-Connector ArmorBlock Connections for Central Alarms
Alarm Silence Pushbutton (A-I0)
Alarm Silence Pushbutton (A-I1)
4 Input / 4 Output
ArmorBlock for
Central Alarms
Alarm Strobe Light (C-O0)
Alarm Horn (C-O1)
Alarm Silence Pushbutton (B-I2)
Alarm Silence Pushbutton (B-I3)
Alarm Strobe Light (D-O2)
Alarm Horn (D-O3)
5. Dress the excess patch cord cables with cable ties so they do not interfere with
operation and to give a pleasing appearance.