Filter
Top Products
7/50D Plus or 7/50D Controller Chapter 3: Installation 46
To copy the selected station’s settings to one other station
1. Touch the gray Copy to Station button next to the green button labeled Copy
To Single Station.
The keypad pops up.
2. Enter the station number for the station you are copying to. Use ← to erase any
mistakes. Use ↵ to enter the value.
The keypad disappears and the Station Copy screen shows the station number you
entered under Copy to Station.
3. Touch the green Copy to Single Station button.
“Complete” briefly appears at the top of the screen.
4. As appropriate, either continue copying to other stations, or touch Return to go
back to the Station n Setup screen.
To copy the selected station’s settings to a range of other stations
1. Touch First Station button next to the green button labeled.
The keypad pops up.
2. Enter the station number for the hopper at the lower end of the range you are copying
to. Use ← to erase any mistakes. Use ↵ to enter the value.
The keypad disappears and the Station Copy screen shows the station number you
entered under First Station.
3. Touch Last Station button next to the light grey button labeled First
Station.
The keypad pops up.
4. Enter the station number for the hopper at the upper end of the range you are copying
to. Use ← to erase any mistakes. Use ↵ to enter the value.
The keypad disappears and the Station Copy screen shows the station number you
entered under Last Station.
5. Touch the green Copy To Range of Stations button.
“Complete” briefly appears at the top of the screen.
6. As appropriate, either continue copying to other stations, or touch Return to go
back to the Station n Setup screen.
To copy the current station’s settings to all other stations
1. Touch the green Copy To All Stations button.
“Complete” briefly appears at the top of the screen.
2. Touch Return to go back to the Station n Setup screen.