Filter
Top Products
7/50D Plus or 7/50D Controller Chapter 3: Installation 43
Setting Up Stations
Before starting the system, you must define several settings for each station, such as which
pump conveys material to it and whether the station has a slide gate. This section first
discusses how to use the controller’s menu system to configure stations. The table on pp. 73–
77 discusses the individual choices.
Setting Up a Single Station
1. Go to the Station Summary screen if needed.
To reach this screen from any other screen, touch Stations on the right-hand side
of the screen. The Station Summary screen appears:
2. Touch the icon for the station you want to set up, and hold it for several seconds.
The Station n Operator screen for the selected station appears: