Open as PDF
40_ Maintain tools and lter
Maintain tools and ﬁlter
CLEANING THE ROBOTIC VACUUM CLEANER
CLEANING THE DRIVING WHEEL
2. Check for foreign substances and remove them
using a stick or a pair of nippers that are not sharp
at the ends if necessary.
1. When cleaning the driving wheel, place a soft cloth
on the ﬂoor and ﬂip the main unit, placing it down
You must turn off the Power Switch at the bottom of the
main unit before cleaning the robotic.
If the robotic vacuum cleaner suddenly starts to zigzag, there
may be foreign substances stuck on the driving wheel.
DJ68-00518A (EN-1)-0.1.indd 40 2009.11.5 11:35:35 AM