Open as PDF
14_ Product Features
The robotic vacuum cleaner’s innovative driving system
makes it possible for it to cross over doorsills with a height of
about 1 cm and clean all rooms. The robotic vacuum cleaner
has been designed so that it does not cross over doorsills
that are higher than 1 cm for safety purposes.
The robotic vacuum cleaner detects and avoids obstacles
in 2 stages. First, the 7 obstacle sensors detect obstacles in
stage 1 and if the robotic vacuum cleaner does crash into an
obstacle, the 2 bumper sensors absorb the impact.
EDGE-CLEANING SIDE ROTATING BRUSH
The edge-cleaning side rotating brush cleans dust from the
When the battery is low, the robotic vacuum cleaner is
automatically guided to the charger to enable it to perform a
quick auto charge.
The 3 Cliff sensors detect downward steps such as stairs or
the front door threshold to prevent robotic vacuum cleaner
from falling down stairs.
When robotic vacuum cleaner is lifted up while cleaning,
automatically driving wheels, power brush, suction motor,
side rotating brush are stopped by sensor’s detecting.
Stair type Vertical type
About 1 cm
DJ68-00518A (EN-1)-0.1.indd 14 2009.11.5 11:33:39 AM