Filter
Top Products
11
SPEED DOME CAMERA
10
SPEED DOME CAMERA
Rotary Switch 2 (SW2)
Camera ID address setting
switch.
Rotary Switch 1 (SW1)
Camera ID address setting
switch.
Connector Cable
Connect to the bracket
connector for installation.
Power Switch
Power on or off
(
※
Factory default : OFF)
DIP Switch (SW3)
For setting each function
1. For selecting a controller
2. For factory setting
3. For terminal setting
4. For terminal setting
Components
Front Panel Back Panel
·If the Rotary Switch and DIP Switch (SW3) are not displayed, turn the power off and on again. Both switches will then be
displayed.
·Do not pull or hold onto the connector cables when moving or delivering the product. It may cause operational failure.
·See the inside of the door for settings for the switches on the main unit of the product.
Cautions
Protocol Selection Switch
Power In Terminal
Controller In Terminal
Video Out Terminal
AC 24V Out
ALARM Out
ALARM In
Power LED
ENGLISH