Filter
Top Products
41
SPEED DOME CAMERA
40
SPEED DOME CAMERA
Camera setting
Pan Limit
On/Off
Position
Press the
Enter key
3) P/T Setting
P/T Setting Menu
P/T Setting
Pan Limit
Tilt Limit
Area Setting
Area Masking
Home Position
Smart P/T ON
Auto Flip ON
Pan Limit
Tilt Limit
On/Off
Position
Press the
Enter key
P/T Setting
Pan Limit
Tilt Limit
Area Setting
Area Masking
Home Position
Smart P/T ON
Auto Flip ON
Tilt Limit
①
Pan Limit
Limits the range of movement in the PAN direction
•Position
Sets the range of movement. Determines the position measured from the left using the joystick and the Enter key. The
end position can be changed to the initial operation when power is resumed, depending on the setting position. This
represents normal operation.
•ON/OFF
Limit starts working when ON is selected.
②
Tilt Limit
Limits the range of movement in the Tilt direction.
•Position
Sets the range of movement. Determines the position measured from above using the joystick and the Enter key.
The end position can be changed to the initial operation when power is resumed depending on the setting position.
It is the normal operation.
•ON/OFF
Limit starts working when ON is selected.
Area Setting
Area 1
Area 2
Area 3
Area 4
Area 5
Area 6
Area 7
Area 8
Area 1
Press the
Enter key
P/T Setting
Pan Limit
Tilt Limit
Area Setting
Area Masking
Home Position
Smart P/T ON
Auto Flip ON
Area Setting
③
Area setting
Indicates the zone. Sets up to 8 areas.
•Area Name
Sets the area names. Up to 12 characters (English, Chinese, Numbers, etc.) can be entered using the joystick
and the Enter key. After input, put the area marks to SET using the joystick and press the Enter key. The setting
is then completed.
•Position
Sets the range of an area. Determines the position measured from the left using the joystick and the Enter key.
When the range of an area is overlapped, the area with the lower number indicates the overlapped area.
•ON/OFF
Sets the area display On or Off. This setting is valid from when a camera moves from the current area to another
area.
Set the OSD Setting ON. When the OSD Setting is OFF, this function doesn’t work. The default is OFF.
ENGLISH