Filter
Top Products
19
SPEED DOME CAMERA
18
SPEED DOME CAMERA
It is necessary to connect the terminating resistance to the two units that are furthermost from the relevant
camera/controller on the RS-485 Interface in order to prevent signal attenuation.
Since cameras have embedded terminating resistance, select whether to activate or deactivate their terminating
resistance by using the DIP Switch. Refer to the connection layout below for deciding which unit is to be connected to
the terminating resistance. Set the terminating resistance to the gray colored unit.
The maximum distance for setting the terminating
resistance is 1.2Km.
User’s manual
Accessories
Template
Installation Bracket
3 fixing screws
1cable lock screw
Safety wire
Component Model
Description
※
Options
The components below are options
Camera Controller
Wall mounted
Ceiling mounted
AC Adapter
Indoor Housing
Indoor Embedded Housing
Outdoor Housing
SCC-16, SCC-3000
STH-160PI
STB-270PW
STB-496PP
STA-110
STA-230
STH-128PE
STH-160PO
Housing for Indoor Installation
Ceiling Embedded Indoor Housing
Housing (with built-in fan and heater) for outdoor installation
Wall mounted type
Ceiling mounted type
Input : AC 110V
Input : AC 230V
Pan/Tilt/Zoom/Focus Control, OSD Action, a variety of function settings
Getting started
ENGLISH