Filter
Top Products
37
SPEED DOME CAMERA
36
SPEED DOME CAMERA
Camera setting
③
Tilt Swing
Activates and sets Swing monitoring in the Tilt direction and deletes data
·Setting
SSelects the preset swing position with the joystick and sets the position with the Enter key.
SPD is the speed with which the camera moves.(001~240°/sec)
DWL is the dwell time for the camera.(1~128sec)
Completes the setting by pressing the Enter key on the selected position.
·Execute
Starts swing monitoring.
Stops it with the Stop key.
·Clear
Deletes the swing data.
⑤
Group SEQ
Starts and sets Sequence monitoring and deletes the data. Registers up to 6 groups.
·Setting
Select the Preset Position to monitor using the joystick, and set the position using the Enter Key.
SPD is the speed with which the camera moves. (001~240°/sec)
DWL is the dwell time for the camera. (1~128sec)
Completes the setting by pressing the Enter key on the selected position.
·Execute
Starts Group monitoring.
Stops it with the Stop key.
·Clear
Deletes the group data.
④
Swing Focus Mode
This mode is for activating the Auto Focus during continuous operation of Pan or Tilt Swing.
Note) Excessively fast Pan or Tilt Swing may disrupt the Auto Focus.
·AUTO/MANUAL
AUTO activates the Auto Focus.
·For 0° Tilt in Wide mode, about a third of the object does not appear on the screen.
Some objects may appear whiter than the actual colors as a result of the AGC effect.
Notes
Tilt Swing
Execute
Clear
Setting
Press the
Enter key
Sequence Setting
Set Preset
Pan Swing
Tilt Swing
Swing Focus Mode MANUAL
Group SEQ
Tour SEQ
PTZ Trace
Power On Resume OFF
Tilt Swing
Group SEQ
Group 1
Group 2
Group 3
Group 4
Group 5
Group 6
Group 1
Press the
Enter key
Sequence Setting
Set Preset
Pan Swing
Tilt Swing
Swing Focus Mode MANUAL
Group SEQ
Tour SEQ
PTZ Trace
Power On Resume OFF
Swing Focus Mode
Sequence Setting
Set Preset
Pan Swing
Tilt Swing
Swing Focus Mode MANUAL
Group SEQ
Tour SEQ
PTZ Trace
Power On Resume OFF
Group SEQ
ENGLISH