Filter
Top Products
Activate editing mode for times-of-use.
Display:
1–7
Select period/day for which the times-of-use are to
be valid:
1–7 = every day,
1 = Monday, 2 = Tuesday, ..., 7 = Sunday
Activate editing mode for period/day.
Display shows:
START
; blinks
Edit start time (steps of 30 minutes).
Confirm start time. Display shows:
STOP
Edit stop time (steps of 30 minutes).
Confirm stop time.
Display shows:
START
The second time-of-use is set like the first time-of-use.
To set the times-of-use for each day, repeat the instructions in the fields highlighted in gray.
Select
End
on the display.
Exit the datapoint for times-of-use.
Exit the parameter level.
Return to the operating level.
Note!
Do not use the 1–7 datapoints to check the programmed times-of-use. Otherwise, the
times-of-use are reset to their default settings.
Note!
The controller automatically returns to the operating level if the keys are left unpressed for two
minutes.
14 EB 5179 EN
Operation
242322212019181716151413121110
9876543210
242322212019181716151413121110
9876543210
STOP
242322212019181716151413121110
9876543210