Filter
Top Products
1.4 Displaying data
Measured values, set points, times-of-use, public holidays and vacation periods can be re
-
trieved and displayed in the
InF1
to
InF9
information levels. The various displays are listed in
section 11.4.
4
InF1: Heating circuit 1
4
InF2: Heating circuit 2
4
InF3: Heating circuit 3
4
InF4: DHW heating
4
InF5: Primary control circuit
4
InF6: Does not exist
4
InF7: LON communication
4
InF8: Error status register/sensor failure
4
InF9: Communication
4
PU: Pumps, manual level
4
bIn-E: Binary inputs and outputs
4
Error: Alarms
Proceed as follows:
Select information level (–> Fig. 10 on page 141).
Confirm information level.
Select value you want to change.
Compare the set point/limit value and the actual value.
Press keys simultaneously:
to switch to the operating level.
10 EB 5179 EN
Operation