Samson 5179 Thermostat User Manual


 
12.3 Display
The following displays are typical displays that can appear.
Icons at the edge of the display may vary depending on the operating mode and how the con
-
troller is configured; they cannot be shown in this case.
Inf1 to Inf3: Heating circuits HK1 to HK3
Display Parameter designation
Current flow temperature at VF1, VF2, VF3
Press enter key to confirm.
The set point is displayed.
Current return flow temperature at RüF1, RüF2, RüF3
Press enter key to confirm.
The set point is displayed.
When the function for differential temperature control using vari-
able weighting factors without return flow temperature limitation is
active, “s-r“ also appears on the display.
Current outdoor temperature
Press enter key to confirm.
The set point is displayed.
Current room temperature
Press enter key to confirm.
The set point is displayed.
EB 5179 EN 121
Appendix
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
˚C