Samson 5100 Thermostat User Manual


 
Note!
The sensor values adjusted are not reset by the Loading default settings function.
2.6 Resetting to default values
All parameters and function blocks from any parameter level can be reset to their default set
-
tings (WE).
Proceed as follows:
Reset to default settings.
Function blocks and parameters are reset to their default settings (WE).
Note!
When the key number is active, the function blocks protected by the key number are also reset to
their default settings.
The controller is ready for operation with its default settings. You just need to set the correct date
and current time.
26 EB 5179 EN
Start-up