Filter
Top Products
Display
Parameter designation
Range of values (default settings)
4-point characteristic
Press key to adjust the following parameters:
outdoor temperature,
return flow temperature (see page 108),
maximum flow rate or maximum capacity.
4-point characteristic:
Point 1: Outdoor temperature
Outdoor temperatures of the points 2, 3, 4 are marked by squares
below the numbers 2, 3, 4.
–30 to 90 °C
(point1=–15°C,point2=–5°C,point3=5°C,point4=15°C)
4-point characteristic:
Point 1: Maximum limit of the flow rate
Limits of the points 2, 3, 4 are marked by squares below the num-
bers 2, 3, 4.
0.01 to 99.9 m
3
/h
(point 1 to point4=9m
3
/h)
4-point characteristic
Point 1: Maximum limit of the capacity
Limits of the points 2, 3, 4 are marked by squares below the num
-
bers 2, 3, 4.
0.1 to 5999 kW
(point 1 to point 4 = 50 kW)
V-offset of the entire system
–300 to 300 m
3
/h (0.0 m
3
/h)
118 EB 5179 EN
Appendix
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
m
3
/h
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
kW
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
m
3
/h
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
m
3
/h
kW