Filter
Top Products
Regency
®
P40 Direct Vent Gas Fireplace
30
INSTALLATION
INSTALLATION
8) Place log 03-33 on the back burner in between the burner tubes.
Slide the log to the left until it touches the end of the burner tube.
9) Place the bottom of log 03-35 onto the 2nd fender post and fi t the
top of log 03-35 into the pin on the left side of log 03-33.
03-33
Burner
Tube
10) Place the end of log 03-36 on the 3rd fender post and fi t the top of
log 03-36 into the pin on the right side of log 03-33.
03-35
03-33
2nd Fender Post
03-36
03-33
3rd Fender Post
Pin
Pin
7
) Fit log 03-34 into the 1st left side Fender Post and rest on the ember
bed.
1st Fender
Post
03-34
Ember Bed
6) Spread the embers along the ember tray on the inside of the fender
as shown.
Ember Tray