Filter
Top Products
48 C1566M-C (10/05)
Figure 39. SER Card Jumper Assignments
4. Insert the new SER card into an available ISA slot. The default CM9700-CC1 configuration provides SER cards in ISA slots 1 and 2, so you
will most likely insert the new card into slot 3 or 4. Refer to Figure 40.
5. Replace the top cover of the CC1.
6. Power up the CC1.
Figure 40. How to Install a CM9700-SER Card
PIN 2
PIN 1
PIN 4
PIN 3
W2 ADDRESS
SELECT
W1 IRQ SELECT
PIN 22
PIN 1 PIN 21
IQ R3
R4IQ
IR 5Q
IRQ 6
I
QR 7
R9I
Q
IR 1
Q0
IRQ
11
Q2IR
1
IQ 4R1
IR 1Q5
PIN 2
CM9700-CC1 CHASSIS, FRONT
SLOT
COVERS
ISA SLOTS (DEFAULT
CM9700-SER CARDS SUPPLIED
IN ISA SLOTS 1 AND 2)
CM9700-SER CARD
ACCESS SLOTS
(SLOT COVERS
REMOVED)