Filter
Top Products
Chapter 2 Configuring and graphing the switch 57
Reference for the BayStack 380-24F Gigabit Switch Management Software
Table 20 describes the Trap Receivers tab items.
Adding a Trap Receiver
To edit the network traps table:
1 In the Trap Receivers tab (Figure 26), click Insert.
The Chassis, Insert Trap Receive dialog box opens (Figure 27).
Figure 27 Chassis, Insert Trap Receive dialog box
2 Type the Index, NetAddr, and the Community information.
3 Click Insert.
Table 20 Edit Chassis dialog box — Trap Receivers tab items
Item Description
NetAddr The address (or DNS hostname) for the trap receiver.
Community Community string used for trap messages to this trap receiver.
Note: Refer to Table 20 on page 57 for description of the Chassis,
Insert Trap Receivers dialog box items.