Filter
Top Products
Chapter 8 RMON 141
Reference for the BayStack 380-24F Gigabit Switch Management Software
Creating an event
To create an event:
1 In the RMONAlarms dialog box Events tab, click Insert.
The RMONAlarms, Insert Events dialog box opens (Figure 71).
Figure 71 Insert Events dialog box
2 In the Description field, type a name for the event.
3 Select the type of event you want.
You can set the event type to log to save memory or to snmp-trap to reduce
traffic from the switch or for better CPU utilization.
If you select snmp-trap or log-and-trap, you must set trap receivers.
4 Click Insert.
The new event is displayed in the Events tab (Figure 72).
Figure 72 New event in the Events tab