Filter
Top Products
Chapter 9 Security parameters 151
Reference for the BayStack 380-24F Gigabit Switch Management Software
Table 57 describes the AuthConfig tab fields.
Security, Insert AuthConfig dialog box
Security, Insert AuthConfig dialog box has editable fields for the AuthConfig tab.
Each row in this dialog box has information that can be updated or changed.
To view the Security, Insert AuthConfig dialog box:
1 From the Device Manager menu bar, select Edit > Security.
The Security window opens with the General tab displayed (Figure 74 on
page 146).
2 Click the AuthConfig tab.
The AuthConfig tab opens (Figure 77 on page 150).
3 Click inside a row.
4 Click Insert.
The Security, Insert AuthConfig dialog box opens (Figure 78).
Table 57 AuthConfig tab fields
Field Description
BrdIndx Index of the slot containing the board on where the port is located.
This value is meaningful only if SecureList value is zero. For other
SecureList values, this parameter should have the value of zero.
PortIndx Index of the port on the board. This value is meaningful only if
SecureList value is zero. For other SecureList values, this
parameter should have the value of zero.
MACIndx An index of MAC addresses that are either designated as
allowed (station) or not-allowed (station).
AccessCtrlType Displays whether the node entry is
node allowed or node
blocked
. A MAC address may be allowed on multiple ports.
SecureList The index of the security list. This value is meaningful only if
BrdIndx and PortIndx values are set to zero. For other board and
port index values, it should also have the value of zero.
The corresponding MAC Address of this entry is allowed or
blocked on all ports of that this port list.