Filter
Top Products
Chapter 4 VME-MXI-2 Configuration and Installation
VXI/VME-PCI8022 for Solaris 4-8
©
National Instruments Corporation
Figure 4-5. EEPROM Operation
Onboard DRAM
The VME-MXI-2 can accommodate up to two 1.35 in. DRAM SIMMs.
Table 4-1 lists the SIMMs you can use. You can use 32-bit or 36-bit
SIMMs since DRAM parity is not required. Because the VME-MXI-2
supports only one organization at a time, all SIMMs installed must be
of the same type. Use Bank 0 first when installing SIMMs. This allows
you to install up to 64 MB. The VME-MXI-2 supports DRAM speeds
of 80 ns or faster.
a. Boot from User Configuration (Factory Configuration Protected) (Default)
b. Boot from Factory Configuration (Factory Configuration Protected)
c. Boot from User Configuration (Factory Configuration Unprotected)
d. Boot from Factory Configuration (Factory Configuration Unprotected)
OFF
1234
U21
OFF
1234
U21
OFF
1234
U21
OFF
1234
U21