National Instruments VME-PCI8022 Water System User Manual


 
Index
©
National Instruments Corporation I-9 VXI/VME-PCI8022 for Solaris
onboard DRAM, 3-17 to 3-18
DRAM configurations (table),
3-18
SIMM size configuration
(figure), 3-17
removing metal enclosure, 3-3
right-side cover (figure), 3-2
trigger input termination, 3-12 to
3-13
VXIbus CLK10 routing, 3-8 to 3-12
CLK10 generated from MXIbus
(figure), 3-9
CLK10 generated from onboard
oscillator (figure), 3-9
CLK10 generated from SMB
(figure), 3-9
drive inverted external CLK
SMB (figure), 3-11
drive non-inverted external CLK
SMB (figure), 3-11
receive external CLK SMB
(figure), 3-11
receive external CLK SMB with
50 ohm termination (figure),
3-11
receiving or driving MXIbus
CLK10 (figure), 3-12
VXIbus local bus, 3-7 to 3-8
VXIbus logical address, 3-4
selection (figure), 3-5
VXIbus Slot 0/non-Slot 0, 3-5 to 3-7
connecting MXIbus cable, 3-20 to 3-21
default settings
Configuration Editor settings (table),
1-14 to 1-15
hardware settings (table), 1-13
hardware description, 1-4 to 1-5
installation, 3-19
quick start installation, 1-7 to 1-8
specifications
electrical, A-7
environmental, A-6
MXIbus capability descriptions, A-4
performance, A-7
physical, A-6
requirements, A-6
VMEbus capability codes, A-5
VXIpeek function, 7-2 to 7-3
VXIpoke function, 7-2 to 7-3
VXISOLARIS macro (note), 7-2
VXISOLARIS symbol, defining, 7-4
VXItedit utility
interacting with VXI/VME devices, 1-9
overview, B-2
VME device configuration information,
1-9
VXI/VME automatic retry feature, 6-25
VXI/VME-MXI-2 Configuration Editor
A16 Write Post and A24/A32 Write Post,
6-21 to 6-22
Address Space and Requested
Memory, 6-21
default settings (table), 1-14 to 1-15
illustration, 6-20
Interlocked Mode, 6-22 to 6-23
LA Selection and Logical Address, 6-20
MXI bus configuration options
advanced MXI settings, 6-28
CLK10, 6-30
MXI Auto Retry, 6-28 to 6-29
MXI BTO Value, 6-27 to 6-28
MXIbus System Controller, 6-27
Transfer Limit, 6-29
overview, 6-19
VXI/VME bus configuration options
advanced VXI settings, 6-24 to 6-25
Arbiter Timeout, 6-27
Arbiter Type, 6-26
Fair Request, 6-27
Request Level, 6-26
Transfer Limit, 6-26