National Instruments VME-PCI8022 Water System User Manual


 
Index
VXI/VME-PCI8022 for Solaris I-6
©
National Instruments Corporation
overview, 6-3 to 6-4
Record Configuration to File, 6-4
Revert to Current Configuration, 6-4
saving changes, 6-3
Update Current Configuration, 6-4
PCI-MXI-2 Device Configuration Editor
Default Controller (LA-1), 6-11
default settings (table), 1-12
illustration, 6-11
Number of Handlers, 6-12
Number of Interrupters, 6-13
Protocol Register, 6-13
Read Protocol Response, 6-13
Servant Area Size, 6-12
System IRQ Level, 6-12
PCI-MXI-2 Logical Address Configuration
Editor
Address Space, 6-6
default settings (table), 1-11
Device Settings group, 6-5 to 6-6
Device Type, 6-6
illustration, 6-5
Logical Address parameter, 6-5 to 6-6
Resource Manager Delay, 6-10
VXI Shared RAM options, 6-7 to 6-10
advanced settings, 6-8 to 6-10
Enable Byte Swapping, 6-9
Lower Half Window and Upper Half
Window, 6-7 to 6-8
Memory Select, 6-9
Shared RAM Pool, 6-7 to 6-8
VXI/VME Shared RAM Size, 6-7
Window Mapping, 6-9 to 6-10
performance specifications
PCI-MXI-2 board, A-3
VME-MXI-2 module, A-11
VXI-MXI-2 module, A-7
physical specifications
PCI-MXI-2, A-3
VME-MXI-2 module, A-10
VXI-MXI-2 module, A-6
problems and solutions, D-1 to D-4
programming considerations. See NI-VXI
software.
Protocol Register contents, specifying, 6-13
Q
questions about NI-VXI software, D-1 to D-4
quick start
configuration, 1-6 to 1-10
default settings, 1-10 to 1-15
PCI-MXI-2 board
Bus Configuration Editor
(table), 1-12
Device Configuration Editor
(table), 1-12
hardware settings (table), 1-11
Logical Address Configuration
Editor (table), 1-11
VME-MXI-2 module
Configuration Editor settings
(table), 1-14 to 1-15
hardware settings (table), 1-14
VXI-MXI-2 module
Configuration Editor settings
(table), 1-14 to 1-15
hardware settings (table), 1-13
device interactions, 1-9 to 1-10
hardware installation, 1-7 to 1-8
VME users, 1-9
R
RAM. See DRAM configuration; VXI Shared
RAM options.
Read Protocol response, specifying, 6-13
README.DOC file, B-2
request level for VME Data Transfer Bus,
setting, 6-26
Requested Memory control, 6-21