Filter
Top Products
50
Number of errors
Displays the number of errors.
Usage - Main Menu Settings
System Management
Main Menu > System Management
Checking or resetting the Error or Filter Sign
1. Touch the ① [Malfunction] tab to check the number of errors, the names of the group in which the
errors occurred, the addresses of the error-source units, and the error codes.
Main Menu > System Management > Status List
To check the error
Touch the Status List button on the [System management] screen.
Error source address
Displays the M-NET address
of the units whose Error/Filter
Signs are turned on.
Error code
Displays the code for the error
that were detected.
To reset the error
1. Touch the ① [Malfunction] tab.
2. Touch the ② All Reset button.
3. Touch the OK button on the pop-up window.
Those groups whose errors have been reset will have an icon indicating that they are stopped.
Group names
Displays the name of the group
that includes the unit whose
Error/Filter Signs are turned on.
* The name of DIDO controller
groups will not be displayed.
If an error occurs, note the error code and consult your dealer or a maintenance provider.