Filter
Top Products
32
Usage - Main Menu Settings
Time and Schedule screen (cont'd)
* Functions that can be included in each event are as follows: Execution Time, ON/OFF, Mode, Fan
Speed, Air Direction,
Set Temperature, and Local Remote Controller Operation Prohibition settings.
* Refer to page 34 for icon definitions.
* The Set Temperature must be set to a temperature within the range that was specified in the Initial
Settings/Basic Settings under the Service Menu.
Refer to the Initial Setting manual to change the temperature setting range.
(The temperature range for the Setback mode depends on the connected indoor units.)
7. When finished making the settings, touch the OK button to return to the Select Pattern screen.
8. Repeat Steps 5 through 7 above to set as many events and the execution time for the events as
necessary.
9. When finished, touch the [Save] button.
10
.Touch the Return button to return to the Select Group and Days/Date screen.
To set the schedule for other groups or days/date ⇒ See Step 2.
When setting is complete ⇒ See Step 11.
11
.When finished, touch the [Save] button.
Change values with the
buttons.
Touch the icons repeatedly to select
the desired one.
Click on the checkbox next to the button to activate the Copy, Paste,
Delete, and Insert buttons.
Copying, pasting, deleting, and inserting settings
6. Set the time and the actions for the selected event number.