Filter
Top Products
46
Usage - Main Menu Settings
Control Panel (cont'd)
Main Menu >Control Panel
To select the groups on which to execute
the SET BACK function
Main Menu > Control Panel > Button Settings
The minimum difference between the upper and lower limits is 4ºC (8ºF).
The temperature range that can be set depends on the connected units.
The groups that do not support the Setback function cannot be selected.
If you change the settings while the SETBACK button is ON, turn off the SETBACK button, and
then turn it back on to reflect the changes.
Controller button settings
1. Touch the ① Setback Button Setting button on the [Button
Setting] screen.
2. Read the pop-up message, and touch the
OK button to confirm.
3. Touch the
⑤ buttons to set the upper and lower limits.
Press the button labeled ⑧ to set different ranges for different
groups. The groups whose temperature setting is different from
the one for the collective setting will appear underlined .
4. Select the groups to include from the Group buttons labeled
⑥ .
By default, all groups are selected.
5. Touch the ⑦ Save button.
Select All
button
Selects all groups.