Filter
Top Products
33
The controller should be repaired or moved only by
qualified personnel. Do not disassemble or modify the
controller.
Improper installation or repair may cause injury,
electric shock, or fire.
Precautions for moving or repairing the controller
To avoid damage to the controller, use appropriate tools to
install, inspect, or repair the controller.
To avoid discoloration, do not use benzene, thinner, or
chemical rag to clean the controller.To clean the controller,
wipe with a soft cloth soaked in water with mild detergent,
wipe off the detergent with a wet cloth, and wipe off water with
a dry cloth.
TC-24A is designed for exclusive use with the Building
Management System by Mitsubishi Electric. The use of this
controller for with other systems or for other purposes may
cause malfunctions.
To avoid damage to the controller, do not overtighten
the screws.
To avoid damage to the controller, provide protection
against static electricity.
Additional precautions
To reduce the risk of shorting, electric shock, fire, or
malfunction, do not touch the circuit board with tools or
with your hands, and do not allow dust to accumulate
on the circuit board.
WARNING CAUTION