Filter
Top Products
39
5. Use the ④ buttons shown in the pop-up window at right
to set the range for each operation mode (Cooling, Heating, and
AUTO).
• The temperature setting range and the operation mode that can be set depend on the indoor unit
and remote controller models.
• Operation from the local remote controllers that are connected to Mr. SLIM® cannot be prohibited
from the TC-24A. Use the button lock function on the controllers instead.
• If the temperature limits are set too high or low, the system changeover function may not work
properly and the units may not operate in the expected mode (Cooling or Heating).
When using the system changeover function, it is recommended not to use the temperature range
limit function.
To clear the lower limit, keep hitting the button until
appears. To clear the upper limit, keep hitting the button until
appears.
Not all functions are supported by all local remote controllers. The
buttons for the unsupported functions will be grayed out.
6. Touch the
⑤ OK button to save the settings.