Filter
Top Products
24
Maintenance
The GF 600 DV Firelight gas stove and its venting
system should be inspected before use and at least
annually by a qualified service technician.
IMPORTANT:
ALWAYS TURN OFF THE GAS SUPPLY TO
THE STOVE BEFORE ANY SERVICE WORK
IS PERFORMED ON THE STOVE.
General cleaning: The firebox should be vacuumed
out annually to remove any surface build up. Be
sure to vacuum or wipe off the pilot assembly and
burner orifice and burner tube. Also, when vacuum-
ing the log set, be sure to handle it carefully as it is
very fragile.
Gasket inspection: It is important that the glass
gasket be inspected at least annually. Examine the
rope gasket for signs of deterioration and make
sure the gasket has a positive seal. This is impor-
tant to prevent combustion gases from escaping
into the room. Replace the gasket if necessary.
Refer to the replacement parts list on page 26.
Always replace any damaged or broken parts
on the GF 600 DV Firelight with JØTUL AUTHORIZED
PARTS ONLY. These are available through your Jøtul
dealer. Never use any substitute parts on your GF
600 DV Firelight gas stove.
RETAIN THIS MANUAL FOR REFERENCE
AND MAKE IT AVAILABLE TO ANYONE
USING OR SERVICING THE STOVE.
Record the following information to help your
dealer determine what you will need should you
ever require parts and service.
GF 600 DV Firelight
MODEL NAME:
SERIAL NUMBER:
DATE OF PURCHASE:
PURCHASED FROM:
NAME OF INSTALLER:
TYPE OF FUEL:
FUEL CONVERSION:
BY:
FOR YOUR RECORDS