Filter
Top Products
79
To store and call stitch pattern combinations
It is possible to retain a pattern combination for future use
even if the machine is turned off. Simply save the pattern
combination in one of the five memory addresses.
A combination of up to 50 patterns can be saved in each
memory address.
NOTE:
Stock/call function is not available in mode 1.
To stock memory
z Program the desired pattern combination.
x Press the stock/call key.
c Press the memory key to store the stitch pattern
combination.
* The machine beeps and an hourglass appears on the
LCD screen while the machine is saving the stitch
pattern combination.
Do not turn the power switch off while the machine is
beeping.
*You can access other memory address (M2 to M5) by
pressing the stock/call key.
*To exit from the stock/call mode, press any key except the
memory, clear, turnover memory, edit or help key.
Overwriting a stored combination
z
x
c
z
x
c
z Program the desired combination.
x Press the stock/call key to select the desired memory
address. The LCD screen will show the pattern
combination already stored.
c Press the memory key and the stored combination will
be replaced with the new combination.