Filter
Top Products
71
Editing program
Uniform stitch adjustment (Modes 2 and 3 only)
The stitch width and length of the programmed stitch
patterns can be uniformly altered.
Example 1: To alter the stitch width of the programmed
pattern 27 and its mirror image in mode 3.
z Shift the cursor to the right of the last programmed
pattern q.
x Press the stitch width adjustment button to alter the stitch
width w.
NOTE:
Stitch length can also be uniformly altered when patterns of
the same category (satin stitches or stretch stitches) have
been programmed.
Start sewing. The programmed patterns will be sewn in the
uniform width.
e Default width (7.0)
r Uniformly altered width (5.0)
If you wish to alter the stitch length or width after sewing the
programmed patterns, press the edit key then follow steps
z and x above.
Unified needle drop position
The needle drop position of the programmed patterns will
vary depending on the combination:
t Unified to the left when combining the patterns with
the left needle position and the center needle position.
y Unified to the right when combining the patterns with
the right needle position and the center needle position.
u Unified to the center when combining the patterns with
the left needle position and the right needle position.
i Unified to the center when combining the patterns with
the left, right and center needle positions.
e
r
q
w
tyui