Filter
Top Products
39
5
MEMORY AND SCAN OPERATION
■ Memory channels
The transceiver has 105 memory channels (plus 2 call
channels). Memory mode is useful for quickly chang-
ing to often-used frequencies.
All 105 memory channels are tuneable which means
the programmed frequency can be tuned temporarily
with the main dial, etc., in memory mode.
➀Select M2 functions.
•Push [DISPLAY] 1 or 2 times to select M.
•Push [MENU] one or more times to select
M2.
➁Push [(F-3)V/M] to select memory mode.
➂Rotate [M-CH] to select the desired memory chan-
nel.
•All memory channels including blank channels can be
selected.
•[UP]/[DN] on the microphone changes the frequency.
➃To return to VFO mode, push [(F-3)V/M] again.
Any unnecessary memory channels can be cleared.
The cleared memory channels become blank chan-
nels.
➀Push [(F-3)V/M] in the M2 display to select mem-
ory mode.
➁Rotate [M-CH] to select a memory channel to be
cleared.
➂Push [MCL(F-2)] for 2 sec. to clear the contents.
•The programmed frequency and operating mode disap-
pear and “
}” appears.
➃To return to VFO mode, push [(F-3)V/M] again.
■ Memory channel selection
■ Memory clearing
Note: During split frequency operation, programmed
memory contents can be called up to the SUB readout
(dot matrix portion of the display).
CW
CH
VFO A
[EXAMPLE]: Selecting memory channel 17.
V/M
F-3
USB
CH
MEMO
SPLIT
CH
MEMO
USB
M-CH SHIFT
MCL
F-2
SPLIT
Push for
2 sec.
CH
MEMO
USB
CH
MEMO
BLANK
MEMORY
CHANNEL
MEMORY
CHANNEL
NUMBER
CAPABILITY
TRANSFER
TO VFO
OVER-
WRITING
CLEAR
Regular
(split memory)
1–99
Independent transmit and receive
frequencies and one mode in each
memory channel.
In addition, tone frequencies (or
1750 Hz tone burst) can also be
stored for repeater use.
Yes Yes Yes
Scan edges
1A–3B
(3 pair)
One frequency and one mode in
each memory channel as scan
edges for programmed scan.
Yes Yes No
Call channel
(split memory)
C1 (144 MHz)
C2 (430 MHz)
Same as regular, but only 144/430
MHz band can be programmed.
Yes Yes No