Filter
Top Products
33
4
RECEIVE AND TRANSMIT
D Connections for CW
D CW operation
➀Connect a paddle or straight key as above.
➁Select CW (or CWå) mode with [MODE].
➂Set CW break-in operation as semi break-in, full
break-in or OFF.
•
Push [DISPLAY] one or two times to select M, if necessary.
•Push [MENU] one or more times to select M4.
•Push [
(F-2)BRK] one or more times to select the desired
condition:
➧ “F-BK”: full break-in
➧ “BK”: semi break-in
➧ No indicator: no break-in (ACC socket connection is
necessary as above.)
➃Set the CW delay time when semi break-in opera-
tion is selected.
➥ Push [DISPLAY] for 2 sec. to select quick set
mode; push [MENU] one or more times to select
Q3 BK-IN DELAY; then rotate the main dial
to set the desired delay time (see p. 48 for
details).
CW
Q4 CW PADDLE
CW
CW
CW
CW
Paddle
[ELEC KEY]
[MICROPHONE]
See p. 34 for
connection details:
Paddle operation from
front panel MIC connector
.
Straight key
Microphone
Quick set mode settingRear panel
4
8
12
144/430 MHz
HF/50 MHz
[ACC]
123
765
9
10 11
13
For no break-in operation:
Connect an external switch such
as a foot switch; or use the
RTTY SEND terminal for all
bands. (See p. 35.)
■ Functions for CW
BK
VFO A
CW
CW
Q3
BK-IN
DELAY
M4
BRK1/4
AGC
CW mode and semi
break-in operation is
selected.
Delay time of 6.0 dots is
selected in quick set
mode for semi break-in
operation.
CH
PO
S1
5
53792040
10
60dB