Filter
Top Products
SYSTEM OVERVIEW
Fire Protection The fire protection portion of your security system (if used) is always on and will
sound an alarm if a fire condition is detected. Refer to the F/RE ALARM
SYSTEM section for important information concerning fire protection, smoke
detectors and planning emergency exit routes from your house.
Alarms when an alarmoccurs,boththe
console and external sounders will sound, and
a message at the console will identify the zone(s) causing the alarm. In addition,
if your system is connected to a central monitoring station, an alarm message
will be sent. To stop the alarm sounding, you simply disarm the system.
Memory Of Alarm When an alarm or trouble condition occurs, the console displays the number(s)
of the zone(s) that caused the problem, and displays the type of alarm or trouble
(ex. FIRE, ALARM, CHECK). The display remains until it is cleared by entering
the OFF sequence (security code + OFF key) twice.
Phone Access & If
your system includes a voice module it will permit you to access the system via
Voice Response a Touch-tone phone, either on-premises or by call-in when away. The phone
Capability access feature will enable you to determine the status of the system and perform
most system commands (including arming and disarming) over the phone.
-4-